NSN 5306-00-543-5474
Wheel Bolt
4.000 inches fastener length, hexagon head style, between 0.226 inches and 0.243 inches head height, width between flats: between 0.544 inches and 0.562 inches .
Manufacturer part number MS16205-62 for national stock number 5306005435474.
Datasheet
-
Product description
Machine Bolt NSN 5306-00-543-5474.
-
MPN or Model
MS16205-62
-
Schedule B
7415.33.8550 (Other copper screws (not for wood) bolts and nuts) -
NMF (National Motor Freight)
093460 - Bolts/nuts NOI Bbc/zinc -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
1.000 inches -
Fastener Length
4.000 inches -
Head Style
Hexagon -
Head Height
Between 0.226 inches and 0.243 inches -
Width Between Flats
Between 0.544 inches and 0.562 inches -
Thread Diameter
0.375 inches -
Features Provided
Finished head -
Thready Qty Per Inch (tpi)
16 -
Min. Tensile Strength (psi)
60000 pounds per square inch -
Minimum Yield Strength
40000 pounds per square inch -
Material
Copper alloy 651 -
Material Specification
Qq-c-591 federal specification single material response -
Thread Series Designator
Unc
More from these suppliers
- 5950-00-070-7637 MPN MS90540-7Radio Frequency Coil
- 5935-00-103-7912 MPN MS24264R22B55P8XElectrical Receptacle Connector
- 5935-00-189-4260 MPN MS27473T12B98PElectrical Plug Connector
- 5935-00-195-9130 MPN MS3108A16S4SElectrical Plug Connector
- 5985-00-212-7420 MPN MS25051-1Antenna Support Sleeve
- 5935-00-233-3719 MPN MS27497P24B61SElectrical Receptacle Connector
- 5935-00-259-1103 MPN MS3108B22-4PElectrical Plug Connector
- 5905-00-279-1515 MPN MS90194-214Composition Fixed Resistor
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-00-543-5474 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS16205-62 | Military Standards |