NSN 5306-00-550-1318
Wheel Bolt
1.250 inches fastener length, hexagon head style, between 0.195 inches and 0.211 inches head height, width between flats: between 0.489 inches and 0.500 inches .
Manufacturer part number MS35297-36 for national stock number 5306005501318.
Datasheet
-
Product description
Machine Bolt NSN 5306-00-550-1318.
-
MPN or Model
MS35297-36
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
1.250 inches -
Fastener Length
1.250 inches -
Head Style
Hexagon -
Head Height
Between 0.195 inches and 0.211 inches -
Width Between Flats
Between 0.489 inches and 0.500 inches -
Thread Diameter
0.312 inches -
Features Provided
Finished head -
Thready Qty Per Inch (tpi)
18 -
Min. Tensile Strength (psi)
120000 pounds per square inch -
Hardness Rating
23.0 rockwell c and 30.0 rockwell c -
Material
Steel -
Material Specification
Ff-s-85b, grade 8 federal specification single material response -
Surface Treatment
Cadmium or zinc -
Surface Treatment Specification
Qq-p-416 federal specification 1st treatment response or qq-z-325 federal specification 2nd treatment response -
Thread Series Designator
Unc
More from these suppliers
- 5935-00-009-9982 MPN MS27510B14CElectrical Connector Cover
- 5935-00-102-7999 MPN MS16108-10Tip Jack
- 5935-00-164-0244 MPN MS3102A16S6PElectrical Receptacle Connector
- 5935-00-173-5691 MPN MS27480T16C26PElectrical Plug Connector
- 5935-00-235-8970 MPN MS27488-16-3Electrical Connector End Seal Plug
- 5935-00-258-7959 MPN MS3101A22-14SElectrical Plug Connector
- 5935-00-271-3205 MPN MS3406D36-10SElectrical Plug Connector
- 5935-00-306-3952 MPN MS27497-E14A18PElectrical Receptacle Connector
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-00-550-1318 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS35297-36 | Military Standards |
5306005501318 | E.c.a Etablissement |