NSN 5306-00-550-3706
Wheel Bolt
7.320 inches fastener length, square head style, between 0.400 inches and 0.444 inches head height, width between flats: between 0.906 inches and 0.938 inches .
Manufacturer part number MS35355-171 for national stock number 5306005503706.
Datasheet
-
Product description
Machine Bolt NSN 5306-00-550-3706.
-
MPN or Model
MS35355-171
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
1.750 inches -
Fastener Length
7.320 inches -
Head Style
Square -
Head Height
Between 0.400 inches and 0.444 inches -
Width Between Flats
Between 0.906 inches and 0.938 inches -
Thread Diameter
0.625 inches -
Features Provided
Unfinished head -
Thready Qty Per Inch (tpi)
11 -
Min. Tensile Strength (psi)
55000 pounds per square inch -
Hardness Rating
25.0 rockwell c and 34.0 rockwell c -
Material
Steel -
Material Specification
Sae gr 1 assn standard single material response -
Surface Treatment
Cadmium or zinc -
Surface Treatment Specification
Qq-p-416, type 2, cl 3 federal specification 1st treatment response or qq-z-325, type 2, cl 3 federal specification 2nd treatment response -
Thread Series Designator
Unc
More from these suppliers
- 5935-00-027-9599 MPN MS3101B28-21SElectrical Plug Connector
- 5950-00-067-4749 MPN MS91189-6Radio Frequency Coil
- 5940-00-082-4663 MPN MS27249-2B5Terminal Board
- 5905-00-110-7412 MPN MS35044-98Composition Fixed Resistor
- 5940-00-159-0246 MPN MS17121-9Stud Terminal
- 5935-00-172-4968 MPN MS27508E10B98PAElectrical Receptacle Connector
- 5935-00-177-2299 MPN MS3106F22-8SElectrical Plug Connector
- 5935-00-180-3849 MPN MS27508E16B35PElectrical Receptacle Connector
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-00-550-3706 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS35355-171 | Military Standards |