NSN 5306-00-558-5959
Wheel Bolt
Between 0.531 inches and 0.562 inches fastener length, hexagon head style, between 0.208 inches and 0.230 inches head height, width between flats: between 0.491 inches and 0.500 inches .
Manufacturer part number MS35308-330 for national stock number 5306005585959.
Datasheet
-
Product description
Machine Bolt NSN 5306-00-558-5959.
-
MPN or Model
MS35308-330
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
Between 0.448 inches and 0.531 inches -
Fastener Length
Between 0.531 inches and 0.562 inches -
Head Style
Hexagon -
Head Height
Between 0.208 inches and 0.230 inches -
Width Between Flats
Between 0.491 inches and 0.500 inches -
Thread Diameter
0.312 inches -
Features Provided
Finished head -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
80000 pounds per square inch -
Material
Stainless steel -
Material Specification
66 federal standard single material response -
Thread Series Designator
Unf
More from these suppliers
- 5940-00-243-7680 MPN NAS704T3Stud Terminal
- 5935-01-323-4638 MPN MS33686-22-2PElectrical Connector Insert
- 1680-01-524-1349 MPN NAS520-12-9Aircr Air Duct Hose
- 5305-00-005-0417 MPN NAS603-50PMachine Screw
- 5305-00-024-5810 MPN MS21090-0833Socket Head Cap Screw
- 5305-00-068-5414 MPN MS16995-11Socket Head Cap Screw
- 5305-00-081-6728 MPN MS24667-31Socket Head Cap Screw
- 5305-00-099-7643 MPN MS21125-0426Close Tolerance Screw
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-00-558-5959 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS35308-330 | National Aerospace Standards |
MS35308-330 | Military Standards |
Stock Check
- NS: 154
- NE: 210