NSN 5306-00-558-7484
Coaxial Connector
Between 1.153 inches and 1.183 inches fastener length, dished hexagon head style, 0.290 inches head height, width between flats: between 0.928 inches and 0.940 inches .
Manufacturer part number 360894-1 for national stock number 5306005587484.
Datasheet
-
Product description
Shear Bolt NSN 5306-00-558-7484.
-
MPN or Model
360894-1
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.533 inches and 0.553 inches -
Fastener Length
Between 1.153 inches and 1.183 inches -
Head Style
Dished hexagon -
Head Height
0.290 inches -
Width Between Flats
Between 0.928 inches and 0.940 inches -
Grip Diameter
Between 0.6226 inches and 0.6230 inches -
Thread Diameter
0.625 inches -
Grip Length
Between 0.615 inches and 0.635 inches -
Thready Qty Per Inch (tpi)
18 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Distance From Head Largest Bearing Surface To Shank Hole Center
1.039 inches first hole and 1.049 inches first hole -
Material
Steel -
Material Specification
Mil-s-6758 military specification single material response or ams 6300 assn standard single material response -
Thread Series Designator
Unf
More from these suppliers
- 1560-00-027-9592 MPN 3C24980-105S Actuator Quadrant
- 1680-00-072-7866 MPN 3F31059-103Bell Crank
- 1560-00-077-0186 MPN 3F30105-142Door Seal Retainer
- 1560-00-084-0130 MPN 377372-1Inboard Flap Link Pan
- 1560-00-133-6225 MPN 4F12752-101AAircraft Structural Component Support
- 1680-00-133-7137 MPN 4C23008-105AAiler Control Cable
- 5985-00-141-5969 MPN EEP1661-113Waveguide Assembly
- 1560-00-164-9526 MPN 4F77156-126AAircraft Stiffener Rib
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-00-558-7484 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
360894-1 | Lockheed Martin Corporation |