NSN 5306-00-558-8425
Coaxial Connector
Between 2.422 inches and 2.469 inches fastener length, hexagon head style, 0.100 inches head height, width between flats: between 0.865 inches and 0.877 inches .
Manufacturer part number CV15-410736-1 for national stock number 5306005588425.
Datasheet
-
Product description
Shear Bolt NSN 5306-00-558-8425.
-
MPN or Model
CV15-410736-1
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.482 inches and 0.529 inches -
Fastener Length
Between 2.422 inches and 2.469 inches -
Head Style
Hexagon -
Head Height
0.100 inches -
Width Between Flats
Between 0.865 inches and 0.877 inches -
Grip Diameter
Between 0.5607 inches and 0.5616 inches -
Shank Unthreaded Hole Diameter
0.141 inches first hole -
Single Shear Strength
23600 pounds per square inch -
Thread Diameter
0.562 inches -
Grip Length
1.940 inches -
Thready Qty Per Inch (tpi)
18 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Distance From Head Largest Bearing Surface To Shank Hole Center
2.234 inches first hole and 2.266 inches first hole -
Material
Steel comp e4340 or steel comp 4340 or steel comp 8740 or steel comp 8735 or steel comp 6150 or steel comp 4140 -
Surface Treatment
Cadmium -
Thread Series Designator
Unf
More from these suppliers
- 5935-00-057-3673 MPN CVC6066AE12SGElectrical Receptacle Connector
- 1560-00-110-6908 MPN 216-20101-10Aircraft Skin
- 1560-00-407-8230 MPN 215-70054-27Roll Pin
- 1560-00-589-4597 MPN CV15-158676-2Rudder Linkage Arm Assembly
- 5950-00-648-2845 MPN CVE150165-2Power Transformer
- 1560-00-853-1432 MPN 215-70095-5Door Assy
- 1560-00-853-1529 MPN 215-70192-54Aircraft Fairing
- 1560-00-853-1898 MPN 215-73101-2Fuel Valve Adapter Assembly
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-00-558-8425 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
CV15-410736-1 | Triumph Aerostructures, Llc |