NSN 5306-00-575-7172
Close Tolerance Hex Head Bolt
Between 0.830 inches and 0.860 inches fastener length, undercut hexagon head style, between 0.110 inches and 0.125 inches head height, width between flats: between 0.367 inches and 0.376 inches .
Manufacturer part number BACB30NE3-8 for national stock number 5306005757172.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-00-575-7172.
-
MPN or Model
BACB30NE3-8
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.320 inches and 0.370 inches -
Fastener Length
Between 0.830 inches and 0.860 inches -
Head Style
Undercut hexagon -
Head Height
Between 0.110 inches and 0.125 inches -
Width Between Flats
Between 0.367 inches and 0.376 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Thread Diameter
0.190 inches -
Grip Length
Between 0.490 inches and 0.510 inches -
Thready Qty Per Inch (tpi)
32 -
Surface Finish
32.0 microinches bearing surface of head -
Material
Steel comp e4340 or steel comp 8740 or steel comp 4340 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416 type 2 cl 3 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-211-0682 MPN BACB30LH3U29Close Tolerance Screw
- 5305-01-339-5013 MPN BACB30NN4S13Close Tolerance Screw
- 5305-01-435-5755 MPN BACB30LU8-28Close Tolerance Screw
- 5305-01-512-8411 MPN 3M1170D3-5AFClose Tolerance Screw
- 5305-01-513-1154 MPN 3M1170D6-10AClose Tolerance Screw
- 5305-01-600-3733 MPN 3M1277E6D8ASocket Head Cap Screw
- 5306-00-205-3700 MPN BACB30NF6H18Close Tolerance Bolt
- 5306-00-523-2857 MPN J643P05AMachine Bolt
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-00-575-7172 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
BACB30NE3-8 | Valley-todeco, Inc. |
BACB30NE3-8 | Sps Technologies, Llc |
BACB30NE3-8 | Federal Manufacturing Corporation |
BACB30NE3-8 | Huck International, Inc. |
BACB30NE3-8 | Arconic Global Fasteners & Rings, |
BACB30NE3-8 | Sps Technologies, Llc |
BACB30NE3-8 | Sps Technologies, Llc |
BACB30NE3-8 | Alcoa Global Fasteners, Inc. |
BACB30NE3-8 | The Boeing Company |
BACB30NE3-8 | Arconic Global Fasteners & Rings, |
BACB30NE3-8 | Sps Technologies, Llc |