NSN 5306-00-576-6735
Close Tolerance Hex Head Bolt
0.906 inches fastener length, hexagon head style, between 0.109 inches and 0.141 inches head height, width between flats: between 0.365 inches and 0.377 inches .
Manufacturer part number AN173C7 for national stock number 5306005766735.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-00-576-6735.
-
MPN or Model
AN173C7
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.406 inches -
Fastener Length
0.906 inches -
Head Style
Hexagon -
Head Height
Between 0.109 inches and 0.141 inches -
Width Between Flats
Between 0.365 inches and 0.377 inches -
Grip Diameter
Between 0.1889 inches and 0.1894 inches -
Shank Unthreaded Hole Diameter
0.070 inches first hole -
Thread Diameter
0.190 inches -
Grip Length
0.500 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Hardness Rating
26.0 rockwell c and 32.0 rockwell c -
Distance From Head Largest Bearing Surface To Shank Hole Center
0.766 inches first hole -
Surface Finish
63.0 microinches grip -
Material
Steel comp 431 -
Material Specification
Mil-s-18732 military specification single material response -
Surface Treatment
Passivate -
Thread Series Designator
Unf
More from these suppliers
- 4920-00-142-7570 MPN ASC44B1029Aircraft Maintenance Fixture
- 5935-00-087-8436 MPN 3108A16-10SElectrical Plug Connector
- 5975-00-295-9324 MPN AN3054-40Electrical Conduit Coupling Nut
- 5935-00-643-6658 MPN AN3108B18-6SElectrical Plug Connector
- 5935-01-239-4821 MPN AN3102A20-9SElectrical Receptacle Connector
- 5305-00-151-1270 MPN AN500B6-24Machine Screw
- 5305-00-180-0033 MPN AN500A10-48Machine Screw
- 5305-00-206-6983 MPN NASM501Machine Screw
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-00-576-6735 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AN173C7 | Aeronautical Standards Group |
AN173C7 | Department Of The Air Force |