NSN 5306-00-576-6909
Coaxial Connector
0.922 inches fastener length, hexagon head style, 0.188 inches head height, width between flats: 0.562 inches .
Manufacturer part number NAS464-6-9 for national stock number 5306005766909.
Datasheet
-
Product description
Shear Bolt NSN 5306-00-576-6909.
-
MPN or Model
NAS464-6-9
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.360 inches -
Fastener Length
0.922 inches -
Head Style
Hexagon -
Head Height
0.188 inches -
Width Between Flats
0.562 inches -
Grip Diameter
Between 0.3737 inches and 0.3742 inches -
Shank Unthreaded Hole Diameter
0.106 inches first hole -
Single Shear Strength
10500 pounds per square inch -
Thread Diameter
0.375 inches -
Grip Length
0.562 inches -
Thready Qty Per Inch (tpi)
24 -
Distance From Head Largest Bearing Surface To Shank Hole Center
0.781 inches first hole -
Material
Steel -
Thread Series Designator
Unf
More from these suppliers
- 1560-01-572-8710 MPN L3003943-032Aircraft Access Door
- 5940-01-447-2950 MPN NAS1063C3-504BETerminal Board Marker Strip
- 5305-00-100-6602 MPN NAS1124-11Close Tolerance Screw
- 5305-00-116-5020 MPN NAS1100C6-8Machine Screw
- 5305-00-126-5148 MPN MS27039DD0823Machine Screw
- 5305-00-143-1508 MPN NAS662C1-5Machine Screw
- 5305-00-151-5680 MPN NAS1218-08-9TMachine Screw
- 5305-00-170-2923 MPN MS24693-26BMachine Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-00-576-6909 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS464-6-9 | National Aerospace Standards |