NSN 5306-00-576-7815
Coaxial Connector
2.188 inches fastener length, hexagon head style, 0.375 inches head height, width between flats: 1.062 inches .
Manufacturer part number NAS464-12-26 for national stock number 5306005767815.
Datasheet
-
Product description
Shear Bolt NSN 5306-00-576-7815.
-
MPN or Model
NAS464-12-26
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.4 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.563 inches -
Fastener Length
2.188 inches -
Head Style
Hexagon -
Head Height
0.375 inches -
Width Between Flats
1.062 inches -
Grip Diameter
Between 0.7481 inches and 0.7488 inches -
Shank Unthreaded Hole Diameter
0.141 inches first hole -
Single Shear Strength
41950 pounds per square inch -
Thread Diameter
0.750 inches -
Grip Length
1.625 inches -
Thready Qty Per Inch (tpi)
16 -
Distance From Head Largest Bearing Surface To Shank Hole Center
2.000 inches first hole -
Material
Steel -
Thread Series Designator
Unf
More from these suppliers
- 5940-00-168-3316 MPN NAS1387-3Conductor Splice
- 5935-01-067-1255 MPN NAS714-23Electrical Receptacle Connector
- 5940-01-381-7112 MPN NAS1063B236-245Terminal Board Marker Strip
- 5305-00-052-6983 MPN MS27039C4-11Machine Screw
- 5305-00-067-3863 MPN NAS1189-3P7NSocket Head Cap Screw
- 5305-00-079-7985 MPN MS24694S203Machine Screw
- 5305-00-085-3226 MPN MS3212-34Machine Screw
- 5305-00-103-2072 MPN NASM35307 P/N MS35307 -419Hexagon Head Cap Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-00-576-7815 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS464-12-26 | National Aerospace Standards |