NSN 5306-00-582-5755
Close Tolerance Hex Head Bolt
Between 5.562 inches and 5.609 inches fastener length, hexagon head style, between 0.203 inches and 0.235 inches head height, width between flats: between 0.553 inches and 0.565 inches .
Manufacturer part number AN176H54 for national stock number 5306005825755.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-00-582-5755.
-
MPN or Model
AN176H54
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.2 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.640 inches and 0.655 inches -
Fastener Length
Between 5.562 inches and 5.609 inches -
Head Style
Hexagon -
Head Height
Between 0.203 inches and 0.235 inches -
Width Between Flats
Between 0.553 inches and 0.565 inches -
Hole Diameter
0.070 inches -
Grip Diameter
Between 0.3737 inches and 0.3742 inches -
Shank Unthreaded Hole Diameter
0.106 inches first hole -
Thread Diameter
0.375 inches -
Grip Length
Between 4.922 inches and 4.954 inches -
Hole Quantity
1 -
Hole Type
Drilled -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Hardness Rating
26.0 rockwell c and 32.0 rockwell c -
Hole Configuration Style
Hexagon longitudinal hole -
Distance From Head Largest Bearing Surface To Shank Hole Center
5.376 inches first hole -
Surface Finish
63.0 microinches grip -
Material
Steel comp 8740 or steel comp 8630 or steel comp 8735 or steel comp 4140 or steel comp 4130 or steel comp 4037 -
Material Specification
Mil-s-6049 military specification 1st material response or mil-s-6050 military specification 2nd material response or mil-s-6098 military specification 3rd material response or mil-s-5626 military specification 4th material response or mil-s-6758 military specification 5th material response or ams 6300 assn standard 6th material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416 type 2 cl 3 federal specification single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 5935-00-259-1846 MPN AN3108M24-5PElectrical Plug Connector
- 5935-00-283-2925 MPN AN3108A14S6SElectrical Plug Connector
- 5935-00-404-7918 MPN AN3108A28-18PElectrical Plug Connector
- 5935-00-501-9167 MPN AN3106E20-33PElectrical Plug Connector
- 5935-00-549-2854 MPN AN3102K16-11PElectrical Receptacle Connector
- 5935-00-552-2292 MPN AN3102A24-5SCElectrical Receptacle Connector
- 5935-01-048-0080 MPN AN3106A24-7SCElectrical Plug Connector
- 5935-01-259-4846 MPN AN3106A22-4SElectrical Plug Connector
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-00-582-5755 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AN176H54 | Aeronautical Standards Group |