NSN 5306-00-582-6200
Close Tolerance Hex Head Bolt
Between 1.578 inches and 1.625 inches fastener length, hexagon head style, between 0.234 inches and 0.266 inches head height, width between flats: between 0.615 inches and 0.627 inches .
Manufacturer part number AN177H14 for national stock number 5306005826200.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-00-582-6200.
-
MPN or Model
AN177H14
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.624 inches and 0.703 inches -
Fastener Length
Between 1.578 inches and 1.625 inches -
Head Style
Hexagon -
Head Height
Between 0.234 inches and 0.266 inches -
Width Between Flats
Between 0.615 inches and 0.627 inches -
Hole Diameter
0.070 inches -
Grip Diameter
Between 0.4362 inches and 0.4367 inches -
Shank Unthreaded Hole Diameter
0.106 inches first hole -
Thread Diameter
0.437 inches -
Grip Length
Between 0.922 inches and 0.954 inches -
Hole Quantity
1 -
Hole Type
Drilled -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Hardness Rating
26.0 rockwell c and 32.0 rockwell c -
Hole Configuration Style
Hexagon longitudinal hole -
Distance From Head Largest Bearing Surface To Shank Hole Center
1.422 inches first hole -
Surface Finish
63.0 microinches grip -
Material
Steel comp 8740 or steel comp 8630 or steel comp 8735 or steel comp 4140 or steel comp 4130 or steel comp 4037 -
Material Specification
Mil-s-6049 military specification 1st material response or mil-s-6050 military specification 2nd material response or mil-s-6098 military specification 3rd material response or mil-s-5626 military specification 4th material response or mil-s-6758 military specification 5th material response or ams 6300 assn standard 6th material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416 type 2 cl 3 federal specification single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 5975-00-280-5764 MPN AN3053-3Electrical Conduit Ferrule
- 5935-00-222-5632 MPN AN3100A10S2SElectrical Receptacle Connector
- 5935-00-248-5839 MPN AN3100A16S1PWElectrical Receptacle Connector
- 5305-00-010-2160 MPN AN545B4-5Wood Screw
- 5305-00-150-9505 MPN AN515B6R10Machine Screw
- 5305-00-151-2526 MPN AN509-816R21Machine Screw
- 5305-00-151-3565 MPN AN515-3-3Machine Screw
- 5305-00-156-2851 MPN AN505-5R5Machine Screw
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-00-582-6200 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AN177H14 | Aeronautical Standards Group |
AN177-14 | Aeronautical Standards Group |