NSN 5306-00-582-6322
Close Tolerance Hex Head Bolt
1.063 inches fastener length, hexagon head style, 0.125 inches head height, width between flats: 0.438 inches .
Manufacturer part number 760794 for national stock number 5306005826322.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-00-582-6322.
-
MPN or Model
760794
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.313 inches -
Fastener Length
1.063 inches -
Head Style
Hexagon -
Head Height
0.125 inches -
Width Between Flats
0.438 inches -
Grip Diameter
0.3434 inches -
Shank Unthreaded Hole Diameter
0.080 inches first hole -
Thread Diameter
0.250 inches -
Grip Length
0.750 inches -
Thready Qty Per Inch (tpi)
28 -
Distance From Head Largest Bearing Surface To Shank Hole Center
0.953 inches first hole -
Material
Steel comp e4340 -
Material Specification
Mil-s-5000 military specification single material response -
Thread Series Designator
Unf
More from these suppliers
- 1560-00-027-1306 MPN 778130-7Tip Tank Rear Seal
- 1560-00-081-0688 MPN 4E10509-105APilot And Copilot Kick Panel
- 1560-00-084-2412 MPN 787862-1Torque Tube Gusset
- 1560-00-098-3555 MPN 4F55613-101ALogistic Rail Fitting
- 1560-00-098-7996 MPN 345178-3Aileron Weight Assembly
- 1560-00-111-4635 MPN 3E52341-123Cargo Bumper Retainer
- 1560-00-117-2428 MPN 177776-5LAircraft Speed Brake
- 1560-00-122-4295 MPN 178217Elevator Spring Arm
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-00-582-6322 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
760794 | Lockheed Martin Corporation |