NSN 5306-00-582-6762
Coaxial Connector
Between 2.330 inches and 2.370 inches fastener length, hexagon head style, 0.220 inches head height, width between flats: between 0.552 inches and 0.564 inches .
Manufacturer part number 26-5715 for national stock number 5306005826762.
Datasheet
-
Product description
Shear Bolt NSN 5306-00-582-6762.
-
MPN or Model
26-5715
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.440 inches and 0.512 inches -
Fastener Length
Between 2.330 inches and 2.370 inches -
Head Style
Hexagon -
Head Height
0.220 inches -
Width Between Flats
Between 0.552 inches and 0.564 inches -
Grip Diameter
Between 0.3733 inches and 0.3742 inches -
Shank Unthreaded Hole Diameter
0.016 inches first hole -
Thread Diameter
0.375 inches -
Grip Length
Between 1.796 inches and 1.828 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
180000 pounds per square inch -
Distance From Head Largest Bearing Surface To Shank Hole Center
2.150 inches first hole and 2.180 inches first hole -
Material
Steel -
Material Specification
Mil-s-5626 military specification single material response or mil-s-6758 military specification single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
E120 fscm 81205 mfr ref single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 1560-00-028-8051 MPN 8-6595-6Aircraft Access Door
- 5945-00-134-7343 MPN 25-61597-1Signal Contro Relay
- 1680-00-198-3300 MPN 6-27876Frict Band Assembly
- 5975-00-328-4423 MPN 5-63974-5Flexible Metal Conduit Assembly
- 1560-00-388-9876 MPN 5-52322Aircraft Fuel Tank
- 1680-00-453-4935 MPN 69-28103-1Engine Wire Bundle
- 1560-00-508-8245 MPN 5-40596-14Aircraft Structural Component Support
- 1560-00-570-3674 MPN 5-88471-11Spar Door Duct Assembly
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-00-582-6762 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
26-5715 | The Boeing Company |