NSN 5306-00-582-9368
Coaxial Connector
Between 2.540 inches and 2.590 inches fastener length, hexagon head style, 0.310 inches head height, width between flats: between 0.928 inches and 0.940 inches .
Manufacturer part number 23-3427 for national stock number 5306005829368.
Datasheet
-
Product description
Shear Bolt NSN 5306-00-582-9368.
-
MPN or Model
23-3427
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.3 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.480 inches and 0.530 inches -
Fastener Length
Between 2.540 inches and 2.590 inches -
Head Style
Hexagon -
Head Height
0.310 inches -
Width Between Flats
Between 0.928 inches and 0.940 inches -
Grip Diameter
Between 0.6240 inches and 0.6244 inches -
Shank Unthreaded Hole Diameter
0.140 inches first hole and 0.150 inches first hole -
Thread Diameter
0.625 inches -
Grip Length
2.060 inches -
Thready Qty Per Inch (tpi)
18 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Distance From Head Largest Bearing Surface To Shank Hole Center
2.360 inches first hole and 2.390 inches first hole -
Material
Steel -
Surface Treatment
Cadmium head -
Surface Treatment Specification
Qq-c-320 cl 2 federal specification single treatment response grip -
Thread Series Designator
Unf
More from these suppliers
- 1560-00-073-1159 MPN 107S8425-26Clamshell Yoke Assembly
- 1560-00-073-4135 MPN 107S8326-153Idler
- 4920-00-113-2123 MPN 25-61207-1Test Adapter Set
- 1560-00-630-1326 MPN 65-30007-4Aircraft Structural Panel
- 1560-00-673-9987 MPN 39-8213-504Aircraft Structural Component Support
- 1560-00-733-4142 MPN 29-11365-502Hatch Strap Assembly
- 1680-00-794-2627 MPN 114H5805-1Cyli Retainer Cover
- 1680-01-009-9089 MPN 10-60822-4Linear Electro-mechanical Actuator
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-00-582-9368 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
23-3427 | The Boeing Company |