NSN 5306-00-582-9677
Wheel Bolt
2.266 inches fastener length, hexagon head style, between 0.328 inches and 0.360 inches head height, width between flats: between 0.928 inches and 0.940 inches .
Manufacturer part number AN10CH21 for national stock number 5306005829677.
Datasheet
-
Product description
Machine Bolt NSN 5306-00-582-9677.
-
MPN or Model
AN10CH21
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.954 inches -
Fastener Length
2.266 inches -
Head Style
Hexagon -
Head Height
Between 0.328 inches and 0.360 inches -
Width Between Flats
Between 0.928 inches and 0.940 inches -
Hole Diameter
0.070 inches -
Shank Unthreaded Hole Diameter
0.070 inches first hole -
Thread Diameter
0.625 inches -
Grip Length
1.312 inches -
Hole Quantity
1 -
Hole Type
Drilled -
Features Provided
Finished head -
Thready Qty Per Inch (tpi)
18 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Hardness Rating
26.0 rockwell c and 32.0 rockwell c -
Hole Configuration Style
Hexagon flats -
Distance From Head Largest Bearing Surface To Shank Hole Center
2.046 inches first hole -
Material
Stainless steel -
Material Specification
Qq-s-770 federal specification single material response -
Surface Treatment
Passivate -
Thread Series Designator
Unf
More from these suppliers
- 5975-00-231-5907 MPN AN3056-10Electrical Conduit Adapter
- 5935-00-259-7440 MPN AN3106A32-6PElectrical Plug Connector
- 5305-00-144-3918 MPN AN526-632R12Machine Screw
- 5305-00-145-6814 MPN AN515-416-32Machine Screw
- 5305-00-274-0492 MPN 525-10R20Machine Screw
- 5305-00-282-8498 MPN AN507-632-7Machine Screw
- 5305-00-840-7634 MPN AN520-10R64Machine Screw
- 5305-00-950-4204 MPN AN505C10-42Machine Screw
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-00-582-9677 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AN10CH21 | Aeronautical Standards Group |