NSN 5306-00-583-5570
Close Tolerance Hex Head Bolt
Between 0.937 inches and 0.957 inches fastener length, round w/wrench flats head style, between 0.432 inches and 0.442 inches head diameter, head height: between 0.090 inches and 0.100 inches .
Manufacturer part number 336C596P13 for national stock number 5306005835570.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-00-583-5570.
-
MPN or Model
336C596P13
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.217 inches and 0.257 inches -
Fastener Length
Between 0.937 inches and 0.957 inches -
Head Style
Round w/wrench flats -
Head Diameter
Between 0.432 inches and 0.442 inches -
Head Height
Between 0.090 inches and 0.100 inches -
Width Between Flats
Between 0.362 inches and 0.372 inches -
Grip Diameter
Between 0.3115 inches and 0.3120 inches -
Shank Unthreaded Hole Diameter
0.065 inches first hole and 0.070 inches first hole -
Thread Diameter
0.312 inches -
Grip Length
Between 0.700 inches and 0.720 inches -
Thready Qty Per Inch (tpi)
24 -
Hardness Rating
34.0 rockwell c and 38.0 rockwell c -
Distance From Head Largest Bearing Surface To Shank Hole Center
0.842 inches first hole -
Surface Finish
63.0 microinches bearing surface of head -
Material
Steel comp 630 -
Material Specification
Ams 5643 assn standard single material response -
Thread Series Designator
Unf
More from these suppliers
- 4920-00-016-9488 MPN 1C3593G01Aircraft Engine Accessories Maintenance Stand
- 4920-00-104-9577 MPN 21C1609P01Lube Pump Filter Sealing Cap
- 5905-00-141-1381 MPN R984P3250AWire Wound Fixed Resistor
- 4920-00-716-5511 MPN 21C942G001Aircraft Engine Maintenance Stand
- 4920-00-772-7066 MPN 1C2952Nozzle A Test Stand
- 4920-00-871-9454 MPN 21C2770P011Vibrat Support Assy
- 4920-00-911-3103 MPN 1C4962G1Lube Dummy Element
- 4920-00-953-2494 MPN 1C3972G1Aircraft Maintenance Fixture
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-00-583-5570 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
336C596P13 | General Electric Company |