NSN 5306-00-584-7499
Close Tolerance Hex Head Bolt
Between 3.937 inches and 3.984 inches fastener length, hexagon head style, between 0.203 inches and 0.235 inches head height, width between flats: between 0.553 inches and 0.565 inches .
Manufacturer part number AN176-37A for national stock number 5306005847499.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-00-584-7499.
-
MPN or Model
AN176-37A
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.609 inches and 0.688 inches -
Fastener Length
Between 3.937 inches and 3.984 inches -
Head Style
Hexagon -
Head Height
Between 0.203 inches and 0.235 inches -
Width Between Flats
Between 0.553 inches and 0.565 inches -
Grip Diameter
Between 0.3737 inches and 0.3742 inches -
Thread Diameter
0.375 inches -
Grip Length
Between 3.296 inches and 3.328 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Hardness Rating
26.0 rockwell c and 32.0 rockwell c -
Material
Steel comp 4037 or steel comp 4130 or steel comp 8630 or steel comp 8735 or steel comp 8740 or steel comp 4140 -
Material Specification
Mil-b-6812 military specification all material responses -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416 type 2 cl 3 federal specification all treatment responses -
Thread Series Designator
Unf
More from these suppliers
- 5940-01-425-6526 MPN NAS1063A14-404Terminal Board Marker Strip
- 5940-01-451-4410 MPN NAS1063A20-500AXTerminal Board Marker Strip
- 1680-01-662-0850 MPN NAS1057W3B-047Spacer A378 Nrp
- 5305-00-004-5180 MPN NAS1190-4T16LSocket Head Cap Screw
- 5305-00-007-6176 MPN NAS1100C02-7PMachine Screw
- 5305-00-071-8889 MPN NASM7839Machine Screw
- 5305-00-078-9820 MPN NAS517-3-39Machine Screw
- 5305-00-225-6197 MPN MS24694A99Machine Screw
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-00-584-7499 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AN176-37A | Aeronautical Standards Group |
NAS56A37 | National Aerospace Standards |
AN176-37A | Aeronautical Standards Group |
NAS56A37 | National Aerospace Standards |
AN176-37A | Aeronautical Standards Group |
NAS56A37 | National Aerospace Standards |
Stock Check
- NE: 547
- NS: 2