NSN 5306-00-584-7523
Close Tolerance Hex Head Bolt
Between 0.890 inches and 0.937 inches fastener length, hexagon head style, between 0.109 inches and 0.141 inches head height, width between flats: between 0.365 inches and 0.377 inches .
Manufacturer part number AN173C7A for national stock number 5306005847523.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-00-584-7523.
-
MPN or Model
AN173C7A
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.374 inches and 0.453 inches -
Fastener Length
Between 0.890 inches and 0.937 inches -
Head Style
Hexagon -
Head Height
Between 0.109 inches and 0.141 inches -
Width Between Flats
Between 0.365 inches and 0.377 inches -
Grip Diameter
Between 0.3737 inches and 0.3742 inches -
Thread Diameter
0.190 inches -
Grip Length
Between 2.922 inches and 2.954 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Hardness Rating
26.0 rockwell c and 32.0 rockwell c -
Surface Finish
63.0 microinches grip -
Material
Steel comp 431 -
Material Specification
Mil-s-18732 military specification single material response -
Surface Treatment
Passivate -
Thread Series Designator
Unf
More from these suppliers
- 5935-00-201-8372 MPN AN3106A22-2SElectrical Plug Connector
- 5935-00-258-7949 MPN AN3101A10SL3PElectrical Plug Connector
- 5935-00-295-3091 MPN EC4322Electrical Plug Connector
- 5935-00-644-6989 MPN AN3106A28-17SYElectrical Plug Connector
- 5935-00-170-3060 MPN AN3106A16-2PElectrical Plug Connector
- 5305-00-174-1178 MPN AN515C6-12Machine Screw
- 5305-00-276-2102 MPN AN520-8-6Machine Screw
- 5305-00-680-6939 MPN AN515PB3R5Machine Screw
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-00-584-7523 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AN173C7A | Aeronautical Standards Group |
932.19.60.422 | Pilatus Aircraft Ltd |
AN173C7A | Aeronautical Standards Group |
932.19.60.422 | Pilatus Aircraft Ltd |
AN173C7A | Aeronautical Standards Group |
932.19.60.422 | Pilatus Aircraft Ltd |