NSN 5306-00-589-3215
Coaxial Connector
0.843 inches fastener length, hexagon head style, between 0.172 inches and 0.204 inches head height, width between flats: between 0.490 inches and 0.502 inches .
Manufacturer part number AN175C6A for national stock number 5306005893215.
Datasheet
-
Product description
Shear Bolt NSN 5306-00-589-3215.
-
MPN or Model
AN175C6A
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.532 inches -
Fastener Length
0.843 inches -
Head Style
Hexagon -
Head Height
Between 0.172 inches and 0.204 inches -
Width Between Flats
Between 0.490 inches and 0.502 inches -
Grip Diameter
Between 0.3112 inches and 0.3117 inches -
Shank Unthreaded Hole Diameter
0.076 inches first hole -
Thread Diameter
0.312 inches -
Grip Length
0.312 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Distance From Head Largest Bearing Surface To Shank Hole Center
0.671 inches first hole -
Material
Stainless steel -
Surface Treatment
Passivate -
Thread Series Designator
Unf
More from these suppliers
- 5905-00-201-7548 MPN AN3155-25-10Nonprecision Wire Wound Variable Resistor
- 5935-00-204-5014 MPN AN3106M14S7SElectrical Plug Connector
- 5935-00-204-5716 MPN AN3102E16S6PElectrical Receptacle Connector
- 5935-00-221-9292 MPN AN3102A22-2SElectrical Receptacle Connector
- 5935-00-262-9344 MPN AN3108A14S2PElectrical Plug Connector
- 5935-00-539-2460 MPN AN3101A16S1SCElectrical Plug Connector
- 5935-00-539-2985 MPN AN3100A22-14SCElectrical Receptacle Connector
- 5935-00-552-7045 MPN AN3106A18-1SYCElectrical Plug Connector
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-00-589-3215 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AN175C6A | Aeronautical Standards Group |