NSN 5306-00-589-9234
Coaxial Connector
2.432 inches fastener length, hexagon head style, 0.300 inches head height, width between flats: 0.875 inches .
Manufacturer part number 578668-1 for national stock number 5306005899234.
Datasheet
-
Product description
Shear Bolt NSN 5306-00-589-9234.
-
MPN or Model
578668-1
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093470 - Bolts/nuts I/s -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.522 inches and 0.532 inches -
Fastener Length
2.432 inches -
Head Style
Hexagon -
Head Height
0.300 inches -
Width Between Flats
0.875 inches -
Grip Diameter
Between 0.5618 inches and 0.5623 inches -
Shank Unthreaded Hole Diameter
0.141 inches first hole -
Thread Diameter
0.562 inches -
Grip Length
Between 0.907 inches and 0.910 inches -
Thready Qty Per Inch (tpi)
18 -
Min. Tensile Strength (psi)
2600000 pounds per square inch -
Distance From Head Largest Bearing Surface To Shank Hole Center
2.195 inches first hole -
Material
Steel comp e4340 -
Material Specification
Mil-s-5000 military specification single material response -
Surface Treatment
Enamel head -
Surface Treatment Specification
Mil-p-6871 type 2 military specification single treatment response grip -
Thread Series Designator
Unf
More from these suppliers
- 5930-00-548-7972 MPN 161901Sensitive Switch
- 5306-00-309-1464 MPN 528075Shoulder Bolt
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-00-589-9234 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
578668-1 | Goodrich Corp |