NSN 5306-00-604-3170
Shouldered Rivet Ring Bolt
About this product
Between 0.250 inches and 0.251 inches eye inside diameter, between 0.990 inches and 1.010 inches shank length, between 0.372 inches and 0.376 inches eye stock thickness, thread diameter: 0.375 inches.
Manufacturer part number 204-001-768-2 for national stock number 5306006043170.
Datasheet
-
Product description
Eye Bolt NSN 5306-00-604-3170.
-
MPN or Model
204-001-768-2
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Left-hand -
Thread Length
Between 0.990 inches and 1.010 inches -
Eye Inside Diameter
Between 0.250 inches and 0.251 inches -
Shank Length
Between 0.990 inches and 1.010 inches -
Eye Stock Thickness
Between 0.372 inches and 0.376 inches -
Overall Length
Between 1.735 inches and 1.765 inches -
Thread Diameter
0.375 inches -
Thready Qty Per Inch (tpi)
16 -
Min. Tensile Strength (psi)
150000 pounds per square inch -
Distance From Center Of Eye To Shank End
1.250 inches -
Eye Outside Width
Between 0.490 inches and 0.510 inches -
Material
Steel -
Material Specification
Mil-s-5626, physical cond c, surface cond 4 military specification single material response or mil-s-6758, physical cond c, surface cond 4 military specification single material response -
Thread Series Designator
Unc
More from these suppliers
- 5935-00-791-0166 MPN 17-14523-1Plug-in Electronic Components Socket
- 5935-01-013-2410 MPN 5935-075-0001Tip Jack
- 5930-01-235-9553 MPN 5930-017-0001Toggle Switch
- 5985-01-315-2826 MPN 17-19174-1Waveguide Assembly
- 5305-01-237-9371 MPN 5305-010-0001Socket Head Cap Screw
- 1680-00-022-2344 MPN 204-001-600-9Aircraft Control Stick
- 1560-00-713-9879 MPN 47-682-139-43Support
- 1560-00-067-8343 MPN 209-030-305-001Door Fitting
Eye Bolt
An externally threaded device whose threaded portion is of one nominal diameter, without a head, but with the unthreaded end either bent more than 225 degrees (3.925 radians) or cast, forged, or punched to resemble an eye. See also bolt, hook. Excludes connector, rod end.
Pricing and Availability
Get a quote for 5306-00-604-3170 eye boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
204-001-768-2 | Bell Helicopter Textron Inc. |
204-001-768-002 | Bell Helicopter Textron Inc. |
204-001-768-2 | Textron Systems Corporation |
204-001-768-2 | Lockheed Martin Corporation |
Stock Check
Availability of this NSN has not been updated recently. Submit
the pricing and availbility form above to receive an up to date quote.