NSN 5306-00-611-0108
Wheel Bolt
Between 3.790 inches and 3.840 inches fastener length, hexagon head style, between 0.730 inches and 0.770 inches head height, width between flats: 0.938 inches .
Manufacturer part number 125C3530 for national stock number 5306006110108.
Datasheet
-
Product description
Machine Bolt NSN 5306-00-611-0108.
-
MPN or Model
125C3530
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.3 lb -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
Between 2.410 inches and 2.580 inches -
Fastener Length
Between 3.790 inches and 3.840 inches -
Head Style
Hexagon -
Head Height
Between 0.730 inches and 0.770 inches -
Width Between Flats
0.938 inches -
Hole Diameter
0.080 inches -
Shank Unthreaded Hole Diameter
0.189 inches first hole and 0.192 inches first hole -
Thread Diameter
0.625 inches -
Grip Length
Between 1.260 inches and 1.380 inches -
Hole Quantity
1 -
Hole Type
Drilled -
Features Provided
Finished head -
Thready Qty Per Inch (tpi)
18 -
Hardness Rating
43.0 rockwell c and 48.0 rockwell c -
Hole Configuration Style
Hexagon flats -
Distance From Head Largest Bearing Surface To Shank Hole Center
3.545 inches first hole and 3.565 inches first hole -
Material
Steel -
Material Specification
Qq-s-624 federal specification single material response -
Surface Treatment
Nickel -
Surface Treatment Specification
171, finish 1.4.3.2 federal standard single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 5305-01-654-7968 MPN 406081Machine Screw
- 6145-01-550-3602 MPN 10059276Electrical Special Purpose Cable
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-00-611-0108 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
125C3530 | General Dynamics-ots, Inc. |