NSN 5306-00-616-2402
Coaxial Connector
2.000 inches fastener length, hexagon head style, 0.125 inches head height, width between flats: 1.062 inches .
Manufacturer part number 89WM1488-3 for national stock number 5306006162402.
Datasheet
-
Product description
Shear Bolt NSN 5306-00-616-2402.
-
MPN or Model
89WM1488-3
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.362 inches -
Fastener Length
2.000 inches -
Head Style
Hexagon -
Head Height
0.125 inches -
Width Between Flats
1.062 inches -
Grip Diameter
Between 0.7481 inches and 0.7488 inches -
Single Shear Strength
41950 pounds per square inch -
Thread Diameter
0.750 inches -
Grip Length
1.438 inches -
Thready Qty Per Inch (tpi)
16 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Material
Steel -
Material Specification
Mil-s-5000 military specification single material response -
Thread Series Designator
Unf
More from these suppliers
- 4820-00-001-1673 MPN A51E9005-3Pressure And Temperature Relief Valve
- 1560-00-005-5736 MPN 128P11529-5Line Assembly
- 1560-00-148-8922 MPN A51B20203-24Aircraft Wing Fairing
- 1560-00-165-6719 MPN 88695-2REngine Channel Assembly
- 1560-00-243-4397 MPN 1128CM43205-3Rudder Fitting Assy
- 1560-00-311-0226 MPN 37P67140-29Tail Pipe Re Insert
- 4920-00-318-1936 MPN 89GT1058Hook N Holding Tool
- 5935-00-344-1946 MPN GA800VC12-6Electrical Connector Backshell
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-00-616-2402 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
89WM1488-3 | Northrop Grumman Systems Corporation |