NSN 5306-00-616-2945
Close Tolerance Hex Head Bolt
Between 0.765 inches and 0.812 inches fastener length, hexagon head style, between 0.109 inches and 0.141 inches head height, width between flats: between 0.365 inches and 0.377 inches .
Manufacturer part number AN173C6A for national stock number 5306006162945.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-00-616-2945.
-
MPN or Model
AN173C6A
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.374 inches and 0.453 inches -
Fastener Length
Between 0.765 inches and 0.812 inches -
Head Style
Hexagon -
Head Height
Between 0.109 inches and 0.141 inches -
Width Between Flats
Between 0.365 inches and 0.377 inches -
Grip Diameter
Between 0.1889 inches and 0.1894 inches -
Thread Diameter
0.190 inches -
Grip Length
Between 0.359 inches and 0.391 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Hardness Rating
26.0 rockwell c and 32.0 rockwell c -
Surface Finish
63.0 microinches grip -
Material
Steel comp 431 -
Material Specification
Mil-s-18732 military specification single material response -
Surface Treatment
Passivate -
Thread Series Designator
Unf
More from these suppliers
- 5935-00-264-4149 MPN AN3106A14S11SElectrical Plug Connector
- 5930-00-265-6271 MPN AN3217-1Sensitive Switch
- 5935-00-552-2374 MPN AN3106A22-14SCElectrical Plug Connector
- 5935-00-642-0755 MPN AN3102A10SL4SElectrical Receptacle Connector
- 5935-00-222-7848 MPN AN3106A28-15PElectrical Plug Connector
- 5935-00-248-5839 MPN AN3100A16S1PWElectrical Receptacle Connector
- 5935-00-296-8004 MPN AN3116-2Electrical Plug Connector
- 5305-00-013-1966 MPN AN500-8-7Machine Screw
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
![Mechanic Bill explains Close Tolerance Hex Head Bolt](/public/images/billy-thinking.png)
Pricing and Availability
Get a quote for 5306-00-616-2945 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AN173C6A | Aeronautical Standards Group |
932.19.60.421 | Pilatus Aircraft Ltd |
Stock Check
![](/public/images/partscage_shelf3.png)