NSN 5306-00-616-6313
Coaxial Connector
Between 2.531 inches and 2.578 inches fastener length, hexagon head style, 0.156 inches head height, width between flats: 0.500 inches .
Manufacturer part number NAS464-5A35 for national stock number 5306006166313.
Datasheet
-
Product description
Shear Bolt NSN 5306-00-616-6313.
-
MPN or Model
NAS464-5A35
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.343 inches and 0.390 inches -
Fastener Length
Between 2.531 inches and 2.578 inches -
Head Style
Hexagon -
Head Height
0.156 inches -
Width Between Flats
0.500 inches -
Grip Diameter
0.3117 inches -
Single Shear Strength
7300 pounds per square inch -
Thread Diameter
0.312 inches -
Grip Length
2.188 inches -
Thready Qty Per Inch (tpi)
24 -
Material
Steel -
Thread Series Designator
Unf
More from these suppliers
- 5940-01-384-3878 MPN NAS1063A2TB107TTerminal Board Marker Strip
- 5940-01-451-4411 MPN NAS1063A2-107ALTerminal Board Marker Strip
- 5305-00-012-0719 MPN MS1635-00-8Machine Screw
- 5305-00-038-2431 MPN NAS514P632-22Machine Screw
- 5305-00-143-1799 MPN MS18064-2Setscrew
- 5305-00-230-9384 MPN NAS1218-3-20PMachine Screw
- 5305-00-274-7712 MPN NAS1221-08E7Machine Screw
- 5305-00-281-8121 MPN NAS1581F3H10Close Tolerance Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-00-616-6313 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS464-5A35 | National Aerospace Standards |