NSN 5306-00-619-4478
Coaxial Connector
Between 2.546 inches and 2.593 inches fastener length, hexagon head style, 0.281 inches head height, width between flats: 0.875 inches .
Manufacturer part number NAS464-9A33 for national stock number 5306006194478.
Datasheet
-
Product description
Shear Bolt NSN 5306-00-619-4478.
-
MPN or Model
NAS464-9A33
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.484 inches and 0.531 inches -
Fastener Length
Between 2.546 inches and 2.593 inches -
Head Style
Hexagon -
Head Height
0.281 inches -
Width Between Flats
0.875 inches -
Grip Diameter
Between 0.5611 inches and 0.5616 inches -
Single Shear Strength
23600 pounds per square inch -
Thread Diameter
0.562 inches -
Grip Length
2.062 inches -
Thready Qty Per Inch (tpi)
18 -
Material
Steel -
Thread Series Designator
Unf
More from these suppliers
- 5305-00-008-9115 MPN NAS1190E02T7LSocket Head Cap Screw
- 5305-00-052-8903 MPN MS24630-57Tapping Screw
- 5305-00-059-3665 MPN NAS1635-3-24Machine Screw
- 5305-00-078-8606 MPN NAS560HK3-15Machine Screw
- 5305-00-078-9643 MPN MS27039-1-34Machine Screw
- 5305-00-078-9820 MPN NAS517-3-39Machine Screw
- 5305-00-138-9907 MPN NAS1133V34Close Tolerance Screw
- 5305-00-139-6754 MPN MS3213-7Machine Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-00-619-4478 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS464-9A33 | National Aerospace Standards |