NSN 5306-00-619-5636
Wheel Bolt
1.641 inches fastener length, hexagon head style, between 0.328 inches and 0.360 inches head height, width between flats: between 0.928 inches and 0.940 inches .
Manufacturer part number AN10C14 for national stock number 5306006195636.
Datasheet
-
Product description
Machine Bolt NSN 5306-00-619-5636.
-
MPN or Model
AN10C14
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.953 inches -
Fastener Length
1.641 inches -
Head Style
Hexagon -
Head Height
Between 0.328 inches and 0.360 inches -
Width Between Flats
Between 0.928 inches and 0.940 inches -
Shank Unthreaded Hole Diameter
0.141 inches first hole -
Thread Diameter
0.625 inches -
Grip Length
0.688 inches -
Features Provided
Finished head -
Thready Qty Per Inch (tpi)
18 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Hardness Rating
26.0 rockwell c and 32.0 rockwell c -
Distance From Head Largest Bearing Surface To Shank Hole Center
1.422 inches first hole -
Material
Stainless steel -
Material Specification
Qq-s-770 federal specification single material response -
Surface Treatment
Passivate -
Thread Series Designator
Unf
More from these suppliers
- 5935-00-204-6508 MPN AN3100E10SL4PElectrical Receptacle Connector
- 5935-00-259-0615 MPN AN3102A32-4PElectrical Receptacle Connector
- 5935-01-261-7322 MPN AN3101A36-1PElectrical Plug Connector
- 5935-00-189-1522 MPN AN3106A32-6SElectrical Plug Connector
- 5305-00-057-0491 MPN AN509-8R8Machine Screw
- 5305-00-144-3927 MPN AN526-632R30Machine Screw
- 5305-00-144-4002 MPN AN505-8-32Machine Screw
- 5305-00-151-3246 MPN AN507Machine Screw
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-00-619-5636 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AN10C14 | Aeronautical Standards Group |