NSN 5306-00-625-3088
Close Tolerance Hex Head Bolt
3.656 inches fastener length, hexagon head style, 0.312 inches head height, width between flats: 0.812 inches .
Manufacturer part number 11661540 for national stock number 5306006253088.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-00-625-3088.
-
MPN or Model
11661540
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.2 lb -
Thread Direction
Right-hand -
Thread Length
0.531 inches -
Fastener Length
3.656 inches -
Head Style
Hexagon -
Head Height
0.312 inches -
Width Between Flats
0.812 inches -
Grip Diameter
0.5610 inches -
Grip Length
2.812 inches -
Hardness Rating
25.0 rockwell c and 30.0 rockwell c -
Material
Steel comp 4140 -
Thread Series Designator
Unf
More from these suppliers
- 5945-00-518-8805 MPN 7996201Electromagnetic Relay
- 5905-00-779-3571 MPN 7527498Film Fixed Resistor
- 5930-00-849-8935 MPN 8380688Pressure Switch
- 5905-00-910-3737 MPN 10947528Resistor Assembly
- 5935-01-466-4719 MPN 12437628Electrical Receptacle Connector
- 5935-01-470-6194 MPN 12421852Electrical Receptacle Connector
- 5940-01-576-0511 MPN 12342399Lug Terminal
- 5975-01-610-1566 MPN 12538474Electrical Equipment Rack Base
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-00-625-3088 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
11661540 | U S Army Tank Automotive Command |