NSN 5306-00-637-5730
Wheel Bolt
1.875 inches fastener length, double hexagon extended washer head style, between 0.325 inches and 0.345 inches head height, width between flats: 0.437 inches .
Manufacturer part number S1635-92010-3 for national stock number 5306006375730.
Datasheet
-
Product description
Machine Bolt NSN 5306-00-637-5730.
-
MPN or Model
S1635-92010-3
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.688 inches -
Fastener Length
1.875 inches -
Head Style
Double hexagon extended washer -
Head Height
Between 0.325 inches and 0.345 inches -
Width Between Flats
0.437 inches -
Extended Washer Diameter
Between 0.639 inches and 0.649 inches -
Extended Washer Thickness
Between 0.042 inches and 0.052 inches -
Thread Diameter
0.375 inches -
Grip Length
1.187 inches -
Features Provided
Finished head -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
180000 pounds per square inch -
Hardness Rating
39.0 rockwell c and 43.0 rockwell c -
Material
Steel -
Surface Treatment
Cadmium -
Thread Series Designator
Unf
More from these suppliers
- 4920-00-113-6060 MPN 65700-40027-105Roll Stake Template
- 5985-00-145-5377 MPN 65202-01011-041Antenna Support
- 1560-00-283-8099 MPN 65504-00011-048Panel Pad Assembly
- 1560-00-520-6288 MPN S14-30-1430-8Blast Tube Deflector Assembly
- 1560-00-591-6735 MPN S1630-62112Aircraft Fuel Tank
- 1680-00-700-2077 MPN S6140-62123Bell Crank
- 1560-00-700-3195 MPN S6180-63047-5Sponson Duct Assy
- 1680-00-727-4635 MPN 65550-03091-102Cargo Hoist Circuit Tester
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-00-637-5730 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
S1635-92010-3 | Sikorsky Aircraft Corporation |