NSN 5306-00-637-7688
Wheel Bolt
Between 1.750 inches and 1.797 inches fastener length, hexagon head style, between 0.328 inches and 0.360 inches head height, width between flats: between 0.928 inches and 0.940 inches .
Manufacturer part number AN10CH15A for national stock number 5306006377688.
Datasheet
-
Product description
Machine Bolt NSN 5306-00-637-7688.
-
MPN or Model
AN10CH15A
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.922 inches and 1.000 inches -
Fastener Length
Between 1.750 inches and 1.797 inches -
Head Style
Hexagon -
Head Height
Between 0.328 inches and 0.360 inches -
Width Between Flats
Between 0.928 inches and 0.940 inches -
Hole Diameter
0.070 inches -
Thread Diameter
0.625 inches -
Grip Length
Between 0.797 inches and 0.828 inches -
Hole Quantity
1 -
Hole Type
Drilled -
Features Provided
Finished head -
Thready Qty Per Inch (tpi)
18 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Hardness Rating
26.0 rockwell c and 32.0 rockwell c -
Hole Configuration Style
Hexagon flats -
Material
Steel comp 431 -
Material Specification
Mil-s-18732 military specification single material response -
Surface Treatment
Passivate -
Thread Series Designator
Unf
More from these suppliers
- 5935-00-191-4649 MPN AN3100A18-1PElectrical Receptacle Connector
- 5935-00-201-3918 MPN AN3108E8S1PElectrical Plug Connector
- 5935-00-201-4164 MPN AN3102A24-6SElectrical Receptacle Connector
- 5935-00-259-2521 MPN AN3106A22-2SElectrical Plug Connector
- 5935-00-518-8572 MPN AN3108B28-21PXElectrical Plug Connector
- 5935-01-149-2540 MPN AN3057-4AElectrical Connector Cable Clamp
- 5935-01-239-4757 MPN AN3100A24-5SElectrical Receptacle Connector
- 5305-00-058-6836 MPN AN500AC4-6Machine Screw
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-00-637-7688 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AN10CH15A | Aeronautical Standards Group |