NSN 5306-00-637-8661
Coaxial Connector
Between 1.781 inches and 1.828 inches fastener length, hexagon head style, between 0.172 inches and 0.204 inches head height, width between flats: between 0.552 inches and 0.564 inches .
Manufacturer part number CV15-910619-1 for national stock number 5306006378661.
Datasheet
-
Product description
Shear Bolt NSN 5306-00-637-8661.
-
MPN or Model
CV15-910619-1
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.359 inches and 0.374 inches -
Fastener Length
Between 1.781 inches and 1.828 inches -
Head Style
Hexagon -
Head Height
Between 0.172 inches and 0.204 inches -
Width Between Flats
Between 0.552 inches and 0.564 inches -
Grip Diameter
Between 0.3748 inches and 0.3750 inches -
Shank Unthreaded Hole Diameter
0.1065 inches first hole -
Thread Diameter
0.375 inches -
Grip Length
Between 1.422 inches and 1.454 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
180000 pounds per square inch -
Hardness Rating
39.0 rockwell c and 43.0 rockwell c -
Distance From Head Largest Bearing Surface To Shank Hole Center
1.644 inches and 1.676 inches first hole -
Part Name Assigned By Controlling Agency
Navy special project -
Material
Steel comp 4130 -
Material Specification
Mil-s-6758 military specification single material response -
Surface Treatment
Cadmium or chromium threads -
Surface Treatment Specification
Cva5-2, fscm 80378 mfr ref all treatment responses head -
Test Data Document
81349-mil-i-6870 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.). -
Thread Series Designator
Unf
More from these suppliers
- 1560-00-395-2526 MPN 215-00107-15Air Duct Parts Kit
- 5935-00-432-6129 MPN 1029-14Electrical Connector Retainer
- 1560-00-496-2254 MPN 216-76301-7Special Purpose Thermal Insulation
- 1560-00-587-3030 MPN CV15-608051-3Elevator Left Trunnion Assembly
- 1560-00-631-4681 MPN CV15-416520-2Access Cockpit Step
- 1560-00-853-0654 MPN 215-44308-7Bell Crank
- 1560-00-853-2207 MPN 215-80070-4Wing Hinge Assy
- 5935-00-938-1222 MPN CVC6069-61Electrical Connector Backshell
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-00-637-8661 shear boltManufacturer Part Numbers and Alternates
| MPN manufacturer part number | Registrant or Supplier |
|---|---|
| CV15-910619-1 | Triumph Aerostructures, Llc |
| CV15-910619-1 | Triumph Aerostructures, Llc |
Stock Check
