NSN 5306-00-637-8734
Close Tolerance Hex Head Bolt
0.906 inches fastener length, hexagon head style, between 0.140 inches and 0.172 inches head height, width between flats: between 0.428 inches and 0.440 inches .
Manufacturer part number AN174C7 for national stock number 5306006378734.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-00-637-8734.
-
MPN or Model
AN174C7
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.468 inches -
Fastener Length
0.906 inches -
Head Style
Hexagon -
Head Height
Between 0.140 inches and 0.172 inches -
Width Between Flats
Between 0.428 inches and 0.440 inches -
Grip Diameter
Between 0.2487 inches and 0.2492 inches -
Shank Unthreaded Hole Diameter
0.076 inches first hole -
Thread Diameter
0.250 inches -
Grip Length
0.438 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Hardness Rating
26.0 rockwell c and 32.0 rockwell c -
Distance From Head Largest Bearing Surface To Shank Hole Center
0.750 inches first hole -
Material
Steel comp 431 -
Material Specification
Mil-s-18732 military specification single material response -
Surface Treatment
Passivate -
Thread Series Designator
Unf
More from these suppliers
- 5975-00-280-5763 MPN AN3053-20Electrical Conduit Ferrule
- 5935-00-552-2879 MPN AN3102A16S4SCElectrical Receptacle Connector
- 5305-00-078-9556 MPN AN507B632R40Machine Screw
- 5305-00-151-2259 MPN AN510-1-3Machine Screw
- 5305-00-151-2774 MPN AN520-10-30Machine Screw
- 5305-00-156-2404 MPN AN507Machine Screw
- 5305-00-182-1375 MPN AN526DD632-10Machine Screw
- 5305-00-206-4120 MPN AN505C6-11Machine Screw
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-00-637-8734 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AN174C7 | Aeronautical Standards Group |
932.19.60.428 | Pilatus Aircraft Ltd |