NSN 5306-00-638-2224
Shouldered Rivet Ring Bolt
About this product
Between 0.190 inches and 0.192 inches eye inside diameter, 0.062 inches shoulder thickness, between 1.641 inches and 1.688 inches shank length, eye stock thickness: between 0.089 inches and 0.099 inches .
Manufacturer part number AN42B15 for national stock number 5306006382224.
Datasheet
-
Product description
Eye Bolt NSN 5306-00-638-2224.
-
MPN or Model
AN42B15
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.391 inches and 0.437 inches -
Eye Inside Diameter
Between 0.190 inches and 0.192 inches -
Shoulder Thickness
0.062 inches -
Shank Length
Between 1.641 inches and 1.688 inches -
Eye Stock Thickness
Between 0.089 inches and 0.099 inches -
Shoulder Diameter
0.437 inches -
Shank Unthreaded Hole Diameter
0.060 inches first hole and 0.080 inches first hole -
Overall Length
2.311 inches -
Thread Diameter
0.190 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Hardness Rating
26.0 rockwell c and 32.0 rockwell c -
Distance From Center Of Eye To Shank End
2.093 inches -
Distance From Threaded End To Shank Hole Center
1.500 inches first hole and 1.531 inches first hole -
Eye Outside Width
0.437 inches -
Material
Steel comp 4140 or steel comp 8740 or steel comp 8630 or steel comp 8735 or steel comp 4130 or steel comp 4037 -
Material Specification
Mil-s-5626 military specification 1st material response or mil-6049 military specification 2nd material response or mil-s-6050 military specification 3rd material response or mil-s-6098 military specification 4th material response or mil-s-6758 military specification 5th material response or ams 6300 assn standard 6th material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2 cl 3 federal specification single treatment response -
Style Designator
Round, closed w/shoulder -
Thread Series Designator
Unf
More from these suppliers
- 5305-00-007-6198 MPN NAS1631E26PMachine Screw
- 5305-00-008-5845 MPN NAS1632CE7Machine Screw
- 5305-00-067-9900 MPN NASM51861-60Tapping Screw
- 5305-00-105-9425 MPN NAS1635-08LL6PSocket Head Cap Screw
- 5305-00-144-0508 MPN NAS1121-6HClose Tolerance Screw
- 5305-00-151-0011 MPN NASM24693-S302Machine Screw
- 5305-00-151-2524 MPN MILS7839Machine Screw
- 5305-00-152-1000 MPN NAS1101E02-4Machine Screw
Eye Bolt
An externally threaded device whose threaded portion is of one nominal diameter, without a head, but with the unthreaded end either bent more than 225 degrees (3.925 radians) or cast, forged, or punched to resemble an eye. See also bolt, hook. Excludes connector, rod end.
Pricing and Availability
Get a quote for 5306-00-638-2224 eye boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AN42B15 | National Aerospace Standards |
AN42B15 | Aeronautical Standards Group |
Stock Check
Availability for this item was last checked on 09/30/24.
The quantities and conditions available at the time were:
- NS: 76
- NE: 1482
- SV: 1