NSN 5306-00-638-3021
Wheel Bolt
Between 0.969 inches and 1.031 inches fastener length, hexagon head style, between 0.226 inches and 0.243 inches head height, width between flats: between 0.551 inches and 0.562 inches .
Manufacturer part number 5517272 for national stock number 5306006383021.
Datasheet
-
Product description
Machine Bolt NSN 5306-00-638-3021.
-
MPN or Model
5517272
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
Between 0.875 inches and 0.938 inches -
Fastener Length
Between 0.969 inches and 1.031 inches -
Head Style
Hexagon -
Head Height
Between 0.226 inches and 0.243 inches -
Width Between Flats
Between 0.551 inches and 0.562 inches -
Hole Diameter
0.062 inches -
Thread Diameter
0.375 inches -
Grip Length
0.094 inches -
Hole Quantity
1 -
Hole Type
Drilled -
Features Provided
Finished head -
Thready Qty Per Inch (tpi)
16 -
Min. Tensile Strength (psi)
95000 pounds per square inch -
Hardness Rating
91.0 rockwell b and 96.0 rockwell b -
Hole Configuration Style
Hexagon flats -
Material
Steel -
Thread Series Designator
Unc
More from these suppliers
- 5935-00-026-9766 MPN 8599218-002Electrical Connector Retainer
- 5940-00-171-0225 MPN 7246882Terminal Board
- 5945-00-259-6442 MPN 1476Electromagnetic Relay
- 5930-00-407-9407 MPN 5146080Thermostatic Switch
- 5975-00-548-5228 MPN 5276008Electrical Conduit Coupling Nut
- 5940-00-557-2345 MPN 200019Lug Terminal
- 4920-00-632-8541 MPN 6796711V Alignment Fixture
- 4920-00-953-8957 MPN 6796971Front Bearing Compressor Puller
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-00-638-3021 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
5517272 | General Motors Corp |
5517272 | General Motors Corp |