NSN 5306-00-638-4267
Coaxial Connector
4.078 inches fastener length, hexagon head style, 0.500 inches head height, width between flats: 1.438 inches .
Manufacturer part number NAS464-16-54 for national stock number 5306006384267.
Datasheet
-
Product description
Shear Bolt NSN 5306-00-638-4267.
-
MPN or Model
NAS464-16-54
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.703 inches -
Fastener Length
4.078 inches -
Head Style
Hexagon -
Head Height
0.500 inches -
Width Between Flats
1.438 inches -
Grip Diameter
0.9985 inches -
Shank Unthreaded Hole Diameter
0.141 inches first hole -
Single Shear Strength
74600 pounds per square inch -
Thread Diameter
1.000 inches -
Grip Length
3.375 inches -
Thready Qty Per Inch (tpi)
14 -
Distance From Head Largest Bearing Surface To Shank Hole Center
3.875 inches first hole -
Material
Steel -
Thread Series Designator
Uns
More from these suppliers
- 5935-01-256-0827 MPN NAS1599Electrical Plug Connector
- 1560-01-423-0218 MPN NAS6808D39Aircraft Structural Component Support
- 5975-01-568-9142 MPN NAS1715C11NHStrain Electrical Conductor Clamp
- 1680-01-571-7708 MPN 10367-A-1032-17Controller Handle
- 5940-01-451-4410 MPN NAS1063A20-500AXTerminal Board Marker Strip
- 5940-00-827-0772 MPN NAS1063A6-1Terminal Board Marker Strip
- 5305-00-008-5887 MPN NAS1102C06-10PMachine Screw
- 5305-00-058-9390 MPN MS51977-75Setscrew
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-00-638-4267 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS464-16-54 | National Aerospace Standards |