NSN 5306-00-638-4794
Coaxial Connector
Between 1.281 inches and 1.328 inches fastener length, between 0.230 inches and 0.270 inches head height, between 0.740 inches and 0.752 inches width between flats, grip diameter: between 0.4982 inches and 0.4991 inches .
Manufacturer part number 3-68582-3 for national stock number 5306006384794.
Datasheet
-
Product description
Shear Bolt NSN 5306-00-638-4794.
-
MPN or Model
3-68582-3
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.406 inches and 0.453 inches -
Fastener Length
Between 1.281 inches and 1.328 inches -
Head Height
Between 0.230 inches and 0.270 inches -
Width Between Flats
Between 0.740 inches and 0.752 inches -
Grip Diameter
Between 0.4982 inches and 0.4991 inches -
Shank Unthreaded Hole Diameter
0.106 inches first hole -
Single Shear Strength
18650 pounds per square inch -
Thread Diameter
0.500 inches -
Grip Length
0.875 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Distance From Head Largest Bearing Surface To Shank Hole Center
1.109 inches first hole and 1.141 inches first hole -
Material
Steel comp 4140 or steel comp e4340 or steel comp 6150 or steel comp 8735 or steel comp 8740 -
Material Specification
Mil-s-5626 military specification 1st material response or mil-s-5000 military specification 2nd material response or mil-s-8503 military specification 3rd material response or mil-s-6098 military specification 4th material response or mil-s-6049 military specification 5th material response -
Surface Treatment
Cadmium head -
Surface Treatment Specification
F1.20 fscm 81205 mfr ref single treatment response head -
Thread Series Designator
Unf
More from these suppliers
- 1560-00-053-5129 MPN 65-1769-3Aircraft Structural Component Support
- 5905-00-071-9280 MPN BACR14AC800Inductive Wire Wound Fixed Resistor
- 1560-00-073-1087 MPN 107S8338-31Aircraft Window Panel
- 5905-00-106-1282 MPN BACR14CJ223Composition Fixed Resistor
- 5935-00-192-1831 MPN 29-35846-3Plug Dummy Connector
- 4920-00-213-9485 MPN F66005Boom Nozzle Support
- 1560-00-329-8422 MPN 114H3035-1Control Rod Rod End
- 1560-00-333-6640 MPN 5-71762-10Window Strip
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-00-638-4794 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
3-68582-3 | The Boeing Company |