NSN 5306-00-638-6131
Externally Relieved Body Bolt
0.900 inches fastener length, hexagon head style, 0.120 inches head height, width between flats: 0.625 inches .
Manufacturer part number 726514-3 for national stock number 5306006386131.
Datasheet
-
Product description
Externally Relieved Body Bolt NSN 5306-00-638-6131.
-
MPN or Model
726514-3
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.610 inches -
Fastener Length
0.900 inches -
Head Style
Hexagon -
Head Height
0.120 inches -
Width Between Flats
0.625 inches -
Shank Unthreaded Hole Diameter
0.064 inches first hole -
First Diameter From Head
0.196 inches -
Distance From Largest Bearing Surface Of Head To End Of First Diameter
0.140 inches -
Thread Diameter
0.250 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Hardness Rating
26.0 rockwell c and 32.0 rockwell c -
Distance From Head Largest Bearing Surface To Shank Hole Center
0.800 inches first hole -
Externally Relieved Body Diameter Quantity
1 -
Material
Steel comp 8630 -
Material Specification
Mil-s-6050 military specification single material response -
Thread Series Designator
Unf
More from these suppliers
- 5930-00-023-0007 MPN 917136-1Rotary Switch
- 1560-00-047-3550 MPN 146793LFitting
- 1560-00-069-7866 MPN 3P60502-101Access Fairing Assembly
- 5945-00-075-4925 MPN 697273-1Relay Assembly
- 1560-00-076-4960 MPN 3E21055-103Aircraft Floor
- 1560-00-077-0959 MPN 794443-101Electronic Co Panel
- 4920-00-132-1580 MPN 4S94259-101AAircraft Maintenance Fixture
- 4920-00-136-5920 MPN 4S94397-101AAircraft Maintenance Fixture
An externally threaded fastener whose threaded portion is of one nominal diameter, and whose unthreaded portion has been machined or ground in one or more places or over its entire length to a maximum diameter less than the minimum pitch diameter of the thread (excludes undercuts for thread relief). It is no. 10 (0.190 in.) (5 mm) or larger in size and has a head which is not designed to be held or driven with an inserted driver or designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. Excludes bolt, internal wrenching and thumbscrew. See also screw, externally relieved body.
Pricing and Availability
Get a quote for 5306-00-638-6131 externally relieved body boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
726514-3 | Lockheed Martin Corporation |