NSN 5306-00-638-9463
Shouldered Rivet Ring Bolt
About this product
Between 0.250 inches and 0.253 inches eye inside diameter, between 0.078 inches and 0.109 inches shoulder thickness, between 0.953 inches and 1.000 inches shank length, eye stock thickness: between 0.183 inches and 0.193 inches .
Manufacturer part number AN44-7A for national stock number 5306006389463.
Datasheet
-
Product description
Eye Bolt NSN 5306-00-638-9463.
-
MPN or Model
AN44-7A
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.531 inches -
Eye Inside Diameter
Between 0.250 inches and 0.253 inches -
Shoulder Thickness
Between 0.078 inches and 0.109 inches -
Shank Length
Between 0.953 inches and 1.000 inches -
Eye Stock Thickness
Between 0.183 inches and 0.193 inches -
Shoulder Diameter
Between 0.609 inches and 0.641 inches -
Overall Length
Between 1.984 inches and 2.031 inches -
Thread Diameter
0.312 inches -
Thready Qty Per Inch (tpi)
24 -
Distance From Center Of Eye To Shank End
Between 1.484 inches and 1.529 inches -
Eye Outside Width
Between 0.609 inches and 0.641 inches -
Material
Steel -
Surface Treatment
Cadmium -
Style Designator
Round, closed w/shoulder -
Thread Series Designator
Unf
More from these suppliers
- 5905-00-173-5498 MPN AN3155-50-5Nonprecision Wire Wound Variable Resistor
- 5935-00-201-5706 MPN AN3102A28-2SWElectrical Receptacle Connector
- 5935-00-259-1164 MPN AN3102C22-14PElectrical Receptacle Connector
- 5935-00-534-7553 MPN AN3106B10SL3SElectrical Plug Connector
- 5935-00-549-6786 MPN AN3106E16S5PElectrical Plug Connector
- 5935-00-643-9346 MPN AN3108B36-15PElectrical Plug Connector
- 5935-01-107-5192 MPN AN3106A28-20PElectrical Plug Connector
- 5935-00-170-5323 MPN AN3102A8S1SElectrical Receptacle Connector
Eye Bolt
An externally threaded device whose threaded portion is of one nominal diameter, without a head, but with the unthreaded end either bent more than 225 degrees (3.925 radians) or cast, forged, or punched to resemble an eye. See also bolt, hook. Excludes connector, rod end.
Pricing and Availability
Get a quote for 5306-00-638-9463 eye boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AN44-7A | Aeronautical Standards Group |
Stock Check
Availability of this NSN has not been updated recently. Submit
the pricing and availbility form above to receive an up to date quote.