NSN 5306-00-639-1505
Coaxial Connector
1.938 inches fastener length, hexagon head style, 0.125 inches head height, width between flats: 1.062 inches .
Manufacturer part number 89WM1488-1 for national stock number 5306006391505.
Datasheet
-
Product description
Shear Bolt NSN 5306-00-639-1505.
-
MPN or Model
89WM1488-1
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.563 inches -
Fastener Length
1.938 inches -
Head Style
Hexagon -
Head Height
0.125 inches -
Width Between Flats
1.062 inches -
Grip Diameter
Between 0.7481 inches and 0.7488 inches -
Single Shear Strength
41950 pounds per square inch -
Thread Diameter
0.750 inches -
Grip Length
1.375 inches -
Thready Qty Per Inch (tpi)
16 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Part Name Assigned By Controlling Agency
Navy special project -
Material
Steel comp e4340 or steel comp 4340 -
Thread Series Designator
Unf
More from these suppliers
- 1560-00-066-2897 MPN 123BP10005-4Glass Panel Assembly
- 1560-00-075-0845 MPN 123BH10031-3Aircraft Access Door
- 1560-00-097-6196 MPN 128W10517-15Weld Assembly
- 5930-00-127-1399 MPN GS835DJ1-10Rotary Switch
- 5935-00-153-0926 MPN G355-2Electrical Connector Backshell
- 5930-00-168-7998 MPN 1128SCH408-1Pressure Switch
- 1680-00-231-9381 MPN 1128AVP40007-4Control Plate
- 5935-00-261-7810 MPN GC829K16AReceptacle Dummy Connector
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-00-639-1505 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
89WM1488-1 | Northrop Grumman Systems Corporation |
89WM1488-1 | Northrop Grumman Systems Corporation |