NSN 5306-00-639-2251
Coaxial Connector
4.172 inches fastener length, hexagon head style, 0.156 inches head height, width between flats: 0.500 inches .
Manufacturer part number NAS498 for national stock number 5306006392251.
Datasheet
-
Product description
Shear Bolt NSN 5306-00-639-2251.
-
MPN or Model
NAS498
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.234 inches -
Fastener Length
4.172 inches -
Head Style
Hexagon -
Head Height
0.156 inches -
Width Between Flats
0.500 inches -
Grip Diameter
0.3117 inches -
Shank Unthreaded Hole Diameter
0.076 inches first hole -
Single Shear Strength
7300 pounds per square inch -
Thread Diameter
0.312 inches -
Grip Length
3.938 inches -
Thready Qty Per Inch (tpi)
24 -
Distance From Head Largest Bearing Surface To Shank Hole Center
4.125 inches first hole -
Material
Steel -
Thread Series Designator
Unf
More from these suppliers
- 5940-01-413-3016 MPN NAS1063B38-54Terminal Board Marker Strip
- 5940-01-425-7392 MPN NAS1063A11-318Terminal Board Marker Strip
- 5940-01-384-3987 MPN NAS1063A2TB107ADTerminal Board Marker Strip
- 5940-01-652-3069 MPN NAS1063A2-107DNTerminal Board Marker Strip
- 5305-00-008-5892 MPN NAS1102C08-30Machine Screw
- 5305-00-051-4505 MPN MS51973-31Setscrew
- 5305-00-066-7325 MPN MS24693-C5Machine Screw
- 5305-00-079-1749 MPN MS24694S29Machine Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-00-639-2251 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS498 | National Aerospace Standards |
NAS464-5-63 | National Aerospace Standards |