NSN 5306-00-639-2350
Close Tolerance Hex Head Bolt
3.328 inches fastener length, hexagon head style, between 0.203 inches and 0.235 inches head height, width between flats: between 0.553 inches and 0.565 inches .
Manufacturer part number AN176H32 for national stock number 5306006392350.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-00-639-2350.
-
MPN or Model
AN176H32
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.2 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.640 inches -
Fastener Length
3.328 inches -
Head Style
Hexagon -
Head Height
Between 0.203 inches and 0.235 inches -
Width Between Flats
Between 0.553 inches and 0.565 inches -
Hole Diameter
0.070 inches -
Grip Diameter
Between 0.3737 inches and 0.3742 inches -
Shank Unthreaded Hole Diameter
0.106 inches first hole -
Thread Diameter
0.375 inches -
Grip Length
2.688 inches -
Hole Quantity
1 -
Hole Type
Drilled -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Hardness Rating
26.0 rockwell c and 32.0 rockwell c -
Hole Configuration Style
Hexagon flats -
Distance From Head Largest Bearing Surface To Shank Hole Center
3.126 inches first hole -
Surface Finish
63.0 microinches grip -
Material
Steel comp 8740 or steel comp 8630 or steel comp 8735 or steel comp 4037 or steel comp 4140 or steel comp 4130 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416 type 2 cl 3 federal specification all treatment responses -
Thread Series Designator
Unf
More from these suppliers
- 5905-00-120-0900 MPN 3300-381200260Composition Fixed Resistor
- 4920-00-509-8021 MPN 44G8744Tester Assembly
- 5306-00-151-1941 MPN 84-13Machine Bolt
- 5905-00-003-8283 MPN MILR39017-1EFilm Fixed Resistor
- 5905-00-003-8284 MPN RLR07C751JPFilm Fixed Resistor
- 5905-00-003-8302 MPN RLR20C271JPFilm Fixed Resistor
- 5935-00-004-0052 MPN MIL-C-26482Electrical Receptacle Connector
- 5905-00-004-6078 MPN RNC60H1032FMFilm Fixed Resistor
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-00-639-2350 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AN176H32 | Aeronautical Standards Group |
B6812 | Military Specifications |
86T32 | Department Of The Air Force |
AN176-32 | Aeronautical Standards Group |