NSN 5306-00-650-1170
Coaxial Connector
Between 7.313 inches and 7.360 inches fastener length, hexagon head style, between 0.422 inches and 0.454 inches head height, width between flats: between 1.240 inches and 1.253 inches .
Manufacturer part number 89WM10968-1 for national stock number 5306006501170.
Datasheet
-
Product description
Shear Bolt NSN 5306-00-650-1170.
-
MPN or Model
89WM10968-1
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
1.5 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.625 inches and 0.672 inches -
Fastener Length
Between 7.313 inches and 7.360 inches -
Head Style
Hexagon -
Head Height
Between 0.422 inches and 0.454 inches -
Width Between Flats
Between 1.240 inches and 1.253 inches -
Grip Diameter
Between 0.8727 inches and 0.8735 inches -
Thread Diameter
0.875 inches -
Grip Length
6.688 inches -
Thready Qty Per Inch (tpi)
14 -
Min. Tensile Strength (psi)
180000 pounds per square inch -
Material
Steel comp e4340 -
Material Specification
Mil-s-5000 military specification single material response -
Surface Treatment
Cadmium -
Thread Series Designator
Unf
More from these suppliers
- 1560-00-066-2999 MPN 123W10454-5Spotweld Assembly
- 1560-00-066-6320 MPN 123PM10226-1Cone Fitting
- 1560-00-113-8207 MPN 123CS10016-504Rudder Trim Tab
- 1560-00-152-0954 MPN 87095-11LAircraft Door
- 1560-00-216-4594 MPN 37E52560-1Aircraft Tip
- 1680-00-370-7221 MPN 99192Hull Strainer Assy
- 1560-00-474-1974 MPN 90587Landing Gear Fitting
- 5905-00-476-4603 MPN 671892Precision Nonwire Wound Variable Resistor
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-00-650-1170 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
89WM10968-1 | Northrop Grumman Systems Corporation |