NSN 5306-00-651-7065
Coaxial Connector
Between 2.153 inches and 2.183 inches fastener length, hexagon head style, 0.290 inches head height, width between flats: between 0.928 inches and 0.940 inches .
Manufacturer part number 360894-6 for national stock number 5306006517065.
Datasheet
-
Product description
Shear Bolt NSN 5306-00-651-7065.
-
MPN or Model
360894-6
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.543 inches -
Fastener Length
Between 2.153 inches and 2.183 inches -
Head Style
Hexagon -
Head Height
0.290 inches -
Width Between Flats
Between 0.928 inches and 0.940 inches -
Grip Diameter
Between 0.6230 inches and 0.6240 inches -
Thread Diameter
0.625 inches -
Grip Length
Between 1.615 inches and 1.635 inches -
Thready Qty Per Inch (tpi)
18 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Material
Steel -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416 type 2 cl 3 federal specification single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 1560-00-019-7661 MPN 789160-1Auto Wiring Harness
- 1560-00-022-0028 MPN 764882-14Tip Tank Seal
- 1560-00-022-0399 MPN 766890-17Insulation Blanket
- 1560-00-097-6799 MPN 4F55629-106AFuselage Rail
- 4920-00-099-9001 MPN X72256Control Test Set
- 1560-00-118-3434 MPN 4J12077-106AAircraft Fairing
- 1560-00-118-3439 MPN 4J12077-108BAircraft Fairing
- 1560-00-121-2235 MPN 176324RAircraft Structural Component Support
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-00-651-7065 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
360894-6 | Lockheed Martin Corporation |