NSN 5306-00-660-2986
Coaxial Connector
Between 1.514 inches and 1.561 inches fastener length, hexagon head style, between 0.188 inches and 0.204 inches head height, width between flats: between 0.490 inches and 0.502 inches .
Manufacturer part number 2357035-14-5 for national stock number 5306006602986.
Datasheet
-
Product description
Shear Bolt NSN 5306-00-660-2986.
-
MPN or Model
2357035-14-5
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.432 inches and 0.479 inches -
Fastener Length
Between 1.514 inches and 1.561 inches -
Head Style
Hexagon -
Head Height
Between 0.188 inches and 0.204 inches -
Width Between Flats
Between 0.490 inches and 0.502 inches -
Grip Diameter
Between 0.4840 inches and 0.5160 inches -
Thread Diameter
0.312 inches -
Grip Length
Between 1.373 inches and 1.452 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Material
Steel comp 8740 -
Material Specification
Mil-s-6049, cond f military specification single material response -
Surface Treatment
Cadmium head -
Thread Series Designator
Unf
More from these suppliers
- 5930-00-098-4991 MPN 7385559-533Flow Switch
- 1560-00-122-8639 MPN 5116323Ou Fairing Assembly
- 1560-00-306-8083 MPN 5325104Aircraft Door
- 4820-00-346-7387 MPN 2115896Flow Control Valve
- 1560-00-568-4511 MPN 2443858Ball
- 1560-00-657-5409 MPN 5439735-525Contro Console Assy
- 1560-00-784-4546 MPN 4547703-503Elev Crank Assembly
- 1560-00-787-3895 MPN 5115654-500Cowling
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-00-660-2986 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
2357035-14-5 | Boeing Company, The |
2357035-14-5 | Boeing Company, The |