NSN 5306-00-685-1537
Externally Relieved Body Bolt
0.850 inches fastener length, double hexagon w/hole head style, 0.260 inches head height, width between flats: 0.247 inches .
Manufacturer part number 327B455P15 for national stock number 5306006851537.
Datasheet
-
Product description
Externally Relieved Body Bolt NSN 5306-00-685-1537.
-
MPN or Model
327B455P15
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Direction
Right-hand -
Thread Length
0.415 inches -
Fastener Length
0.850 inches -
Head Style
Double hexagon w/hole -
Head Height
0.260 inches -
Width Between Flats
0.247 inches -
Extended Washer Diameter
0.375 inches -
Extended Washer Thickness
0.045 inches -
First Diameter From Head
0.166 inches -
Distance From Largest Bearing Surface Of Head To End Of First Diameter
0.435 inches -
Thread Diameter
0.190 inches -
Nonstandard Thread Pitch Diameter
+0.1644/+0.1667 inches -
Thready Qty Per Inch (tpi)
32 -
Hardness Rating
32.0 rockwell c and 36.0 rockwell c -
Minimum Yield Strength
85000 pounds per square inch -
Externally Relieved Body Diameter Quantity
1 -
Material
Iron alloy 660 -
Material Specification
Ams 5735 assn standard single material response -
Surface Treatment
Nickel -
Thread Series Designator
Unf
More from these suppliers
- 5905-00-059-5276 MPN 7480938P3Composition Fixed Resistor
- 5950-00-158-9131 MPN K27J290REV5Reactor
- 5940-00-178-0207 MPN 276B512G2Terminal Board
- 5940-00-231-1557 MPN GE2273Lug Terminal
- 5950-00-232-4833 MPN T51J103-1Electrical Coil
- 5905-00-247-6295 MPN CR8000Nonprecision Wire Wound Variable Resistor
- 5930-00-252-2576 MPN 5998593P13Push Switch
- 5930-00-369-0929 MPN K6578345NPC6Stationary Contact
An externally threaded fastener whose threaded portion is of one nominal diameter, and whose unthreaded portion has been machined or ground in one or more places or over its entire length to a maximum diameter less than the minimum pitch diameter of the thread (excludes undercuts for thread relief). It is no. 10 (0.190 in.) (5 mm) or larger in size and has a head which is not designed to be held or driven with an inserted driver or designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. Excludes bolt, internal wrenching and thumbscrew. See also screw, externally relieved body.
Pricing and Availability
Get a quote for 5306-00-685-1537 externally relieved body boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
327B455P15 | General Electric Company |
327B455P15 | General Electric Co |