NSN 5306-00-685-3554
Coaxial Connector
Between 0.613 inches and 0.643 inches fastener length, dished hexagon head style, between 0.125 inches and 0.140 inches head height, width between flats: between 0.430 inches and 0.439 inches .
Manufacturer part number NAS1104-5 for national stock number 5306006853554.
Datasheet
-
Product description
Shear Bolt NSN 5306-00-685-3554.
-
MPN or Model
NAS1104-5
-
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.291 inches and 0.341 inches -
Fastener Length
Between 0.613 inches and 0.643 inches -
Head Style
Dished hexagon -
Head Height
Between 0.125 inches and 0.140 inches -
Width Between Flats
Between 0.430 inches and 0.439 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Thread Diameter
0.250 inches
More from these suppliers
- 1680-00-340-0045 MPN NAS164Control Whee Insert
- 5305-00-003-9326 MPN NAS6002U16Machine Screw
- 5305-00-007-6182 MPN NAS1100C04-10PMachine Screw
- 5305-00-044-5888 MPN NAS1351C08H16Socket Head Cap Screw
- 5305-00-052-1457 MPN MS35308-303Hexagon Head Cap Screw
- 5305-00-054-9234 MPN MS24694C122Machine Screw
- 5305-00-081-1737 MPN NAS514P1032-8PMachine Screw
- 5305-00-151-6173 MPN NAS1635-01-4Machine Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-00-685-3554 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1104-5 | National Aerospace Standards |