NSN 5306-00-685-7258
Wheel Bolt
Between 3.578 inches and 3.625 inches fastener length, hexagon head style, between 0.234 inches and 0.266 inches head height, width between flats: between 0.615 inches and 0.627 inches .
Manufacturer part number AN7-34A for national stock number 5306006857258.
Datasheet
-
Product description
Machine Bolt NSN 5306-00-685-7258.
-
MPN or Model
AN7-34A
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.625 inches and 0.703 inches -
Fastener Length
Between 3.578 inches and 3.625 inches -
Head Style
Hexagon -
Head Height
Between 0.234 inches and 0.266 inches -
Width Between Flats
Between 0.615 inches and 0.627 inches -
Thread Diameter
0.438 inches -
Grip Length
Between 2.922 inches and 2.953 inches -
Features Provided
Finished head -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Hardness Rating
32.0 rockwell c -
Material
Steel comp 4140 or steel comp 8740 or steel comp 8630 or steel comp 8735 or steel comp 4130 or steel comp 4037 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2, class 3 federal specification single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 5935-01-322-4929 MPN NAS820-32AElectrical Connector Cover
- 5940-01-413-3022 MPN NAS1063B92-111Terminal Board Marker Strip
- 5940-01-451-2686 MPN NAS1063E3-551XTerminal Board Marker Strip
- 5305-00-007-1556 MPN NAS1100E02-3PMachine Screw
- 5305-00-060-9740 MPN MS21262-36Socket Head Cap Screw
- 5305-00-106-6272 MPN NAS1221-06-5PClose Tolerance Screw
- 5305-00-144-1464 MPN NAS1624-8Machine Screw
- 5305-00-197-2355 MPN NAS340CPA20Close Tolerance Screw
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-00-685-7258 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AN7-34A | Aeronautical Standards Group |
MILB6812 | National Aerospace Standards |
MILB6812 | Military Specifications |