NSN 5306-00-687-6406
Close Tolerance Hex Head Bolt
1.109 inches fastener length, hexagon head style, 0.070 inches head height, width between flats: 0.625 inches .
Manufacturer part number S6110-25072-2 for national stock number 5306006876406.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-00-687-6406.
-
MPN or Model
S6110-25072-2
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.421 inches -
Fastener Length
1.109 inches -
Head Style
Hexagon -
Head Height
0.070 inches -
Width Between Flats
0.625 inches -
Grip Diameter
0.4367 inches -
Shank Unthreaded Hole Diameter
0.106 inches first hole -
Thread Diameter
0.437 inches -
Grip Length
0.688 inches -
Thready Qty Per Inch (tpi)
20 -
Distance From Head Largest Bearing Surface To Shank Hole Center
0.906 inches first hole -
Material
Steel -
Thread Series Designator
Unf
More from these suppliers
- 1560-00-109-3041 MPN 65205-07001-045Aircraft Fairing
- 5930-00-163-4615 MPN 65351-11563Pressure Switch
- 1560-00-173-7706 MPN 65209-02064-042Cover Assy
- 1560-00-225-8262 MPN 65205-08015-042Pylon Panel
- 1560-00-348-9942 MPN S14-40-3040-1Pit Control Subassy
- 1560-00-915-6972 MPN 65205-09013-104Aircraft Fairing
- 5950-00-938-4682 MPN 65550-01048-102Power Autotransformer Transformer
- 1680-01-082-9825 MPN 70400-01222-041Aircraft Control Stick
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-00-687-6406 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
S6110-25072-2 | Sikorsky Aircraft Corporation |
S6110-25072-002 | Sikorsky Aircraft Corporation |