NSN 5306-00-688-1669
Coaxial Connector
3.578 inches fastener length, hexagon head style, 0.188 inches head height, width between flats: between 0.553 inches and 0.564 inches .
Manufacturer part number NAS1106-51D for national stock number 5306006881669.
Datasheet
-
Product description
Shear Bolt NSN 5306-00-688-1669.
-
MPN or Model
NAS1106-51D
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.390 inches -
Fastener Length
3.578 inches -
Head Style
Hexagon -
Head Height
0.188 inches -
Width Between Flats
Between 0.553 inches and 0.564 inches -
Grip Diameter
Between 0.3735 inches and 0.3745 inches -
Shank Unthreaded Hole Diameter
0.106 inches first hole -
Thread Diameter
0.375 inches -
Grip Length
3.188 inches -
Thready Qty Per Inch (tpi)
24 -
Distance From Head Largest Bearing Surface To Shank Hole Center
3.458 inches first hole -
Material
Steel -
Thread Series Designator
Unf
More from these suppliers
- 1680-00-604-8346 MPN NAS26-3Tank Strap Trunnion
- 5935-01-597-0337 MPN E0762F15-04LSpec Backshell
- 5940-01-384-3892 MPN NAS1063A8TB98TTerminal Board Marker Strip
- 5940-01-437-8564 MPN NAS1063A2-107CYTerminal Board Marker Strip
- 5940-01-447-2944 MPN NAS1063A3-504ALTerminal Board Marker Strip
- 5305-00-007-0287 MPN NAS1131C88PClose Tolerance Screw
- 5305-00-021-7093 MPN MS21295-55Socket Head Cap Screw
- 5305-00-043-0272 MPN MS51029-40Setscrew
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-00-688-1669 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1106-51D | National Aerospace Standards |